Skip to Content
  1. All Products
  2. All Products
  3. Zeftronics Volt Reg R25V0N
Select currency EUR
Zeftronics Volt Reg R25V0N

Image for illustration only. It may show a product series rather than the exact product offered.

Zeftronics Volt Reg R25V0N

https://www-old.roctexo.com/web/image/product.template/47160/image_1920?unique=2845372
Part numbers : RX1-07-00636 , R25V0N , 07-00636
Unit of Measure: EA

607.87 EUR / EA 607.87 EUR 607.87 € excl. VAT

607.87 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Zeftronics R25V0N is a 28 V Type A alternator controller designed to provide voltage regulation, over-voltage protection and low-voltage warning functionality in aircraft electrical systems.

Manufacturer part number: R25V0N.

  • Nominal voltage regulation: 28.4 V ± 0.4 V
  • Maximum field current: 5 A
  • Low-voltage indication point: 24.7 V ± 0.5 V
  • Over-voltage protection point: 32.0 V ± 0.8 V
  • Externally adjustable voltage regulation
  • Troubleshooting light and low-/over-voltage indication output
  • Manufacturer identifies the unit for single- or dual-alternator applications; verify installation applicability with current approved data.

Zeftronics lists the R25V0N as FAA-STC approved. EASA approval status and installation eligibility must be confirmed for the specific aircraft and installation. Follow the manufacturer’s current installation instructions and applicable maintenance data.

The manufacturer lists an installation drawing, product eligibility catalogue, troubleshooting notes, STC certificate and Instructions for Continued Airworthiness (ICA) for this model.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.