Skip to Content
  1. All Products
  2. All Products
  3. Used Garmin GTX 320A Transponder
Select currency EUR
Used Garmin GTX 320A Transponder

Image for illustration only. It may show a product series rather than the exact product offered.

Used Garmin GTX 320A Transponder

https://www-old.roctexo.com/web/image/product.template/106966/image_1920?unique=8ef9bbe
Part numbers : RX1-11-13218 , GTX-320A , 11-13218
Unit of Measure: EA

1383.26 EUR / EA 1383.26 EUR 1,383.26 € excl. VAT

1383.26 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Garmin GTX 320A is a compact, panel-mounted solid-state transponder providing Mode A and Mode C operation. This used unit is identified by manufacturer part number GTX-320A.

The GTX 320A uses traditional four-knob squawk-code selection and supports 4,096 Mode A identification codes. Garmin’s published specifications list Mode C altitude reporting in 30 m (100 ft) increments, from -305 m to 19,202 m (-1,000 ft to 63,000 ft), subject to correct installation and interfacing.

  • Panel-mounted solid-state Mode A/C transponder
  • Manufacturer part number: GTX-320A
  • Transmitter frequency: 1090 MHz
  • Receiver frequency: 1030 MHz
  • Nominal transmitter output: 200 W
  • Published dimensions: 208 x 159 x 42 mm (L x W x H)
  • Garmin identifies the GTX 320A as discontinued and not ADS-B capable

As a used avionics component, installation suitability, airworthiness status, configuration, condition, and included accessories should be verified by appropriately qualified personnel before installation or return to service.

Reference documentation: Garmin GTX 320A specifications.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.