Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

UMA 3-1/8 Altimeter 0-3000 Mtr With Mb Dial

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for UMA, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by UMA.
https://www-old.roctexo.com/web/image/product.template/92962/image_1920?unique=8ef9bbe
Part numbers : RX1-10-05127 , 5-300-50 , 10-05127
Unit of Measure: EA

244.64 EUR / EA 244.64 EUR 244.64 € excl. VAT

244.64 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The UMA 5-300-50 is a compact, single-pointer altimeter in an approximately 79 mm panel format. It provides a metric altitude range of 0–3,000 m and features a millibar barometric-setting scale viewed through the Kollsman window.

  • Manufacturer part number: 5-300-50
  • Altitude range: 0–3,000 m
  • Barometric setting: millibars
  • Instrument type: non-sensitive, single-pointer altimeter
  • Case: non-sealed
  • Approval status: not EASA/FAA approved

UMA identifies this model within its Non-TSO flight-instrument range. For the 79 mm version, the manufacturer’s installation guidance notes that the non-sealed case must not be connected to the aircraft static line, as this may create a static-system leak. Installation and use should be assessed by appropriately qualified personnel in accordance with the applicable aircraft documentation and regulatory requirements.

Manufacturer installation instructions | Manufacturer panel cut-out drawing

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.