Skip to Content
  1. All Products
  2. All Products
  3. UMA 2-1/4 Airspeed Indicator 40-300 KMountain High TSO
Select currency EUR
UMA 2-1/4 Airspeed Indicator 40-300 KMountain High TSO

Image for illustration only. It may show a product series rather than the exact product offered.

UMA 2-1/4 Airspeed Indicator 40-300 KMountain High TSO

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for UMA, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by UMA.
https://www-old.roctexo.com/web/image/product.template/120825/image_1920?unique=8ef9bbe
Part numbers : RX1-10-03605 , T16-212-300 , 10-03605
Unit of Measure: EA

630.49 EUR / EA 630.49 EUR 630.49 € excl. VAT

630.49 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The UMA Instruments T16-212-300 is a 2-1/4 in (57 mm) analog airspeed indicator with a 40–300 km/h display range. It is part of UMA’s TSO’d airspeed-indicator range and is identified by manufacturer part number T16-212-300.

  • 2-1/4 in (57 mm) instrument format
  • Airspeed range: 40–300 km/h
  • FAA TSO-C2d specification basis
  • Published for fixed-wing aircraft with reciprocating or turboprop engines

UMA installation information for the T16-21X series specifies use in a controlled-temperature environment from −55 °C to +85 °C and up to 25,000 ft (approximately 7,600 m). It is not intended for turbojet aircraft or helicopters. Verify the applicable aircraft maintenance data, installation instructions and approval basis before installation; no EASA approval is stated here.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.