Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

uAvionix Av-Link WiFi Hub For AV-30-C - PMA Approved

https://www-old.roctexo.com/web/image/product.template/134175/image_1920?unique=8ef9bbe
Part numbers : RX1-11-20325 , UAX-90090-01 , 11-20325
Unit of Measure: EA

338.54 EUR / EA 338.54 EUR 338.54 € excl. VAT

338.54 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 19 EA ready to ship on Thursday 2026-11-12
Order before 16:00 CET Today
Up to 29 EA ready to ship on Monday 2026-11-16
Order before 16:00 CET Today
64 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The uAvionix AV-Link PMA is a Wi-Fi connectivity module designed for use with the AV-30-C. It provides an integrated wireless bridge between the AV-30-C and compatible Wi-Fi-enabled ADS-B receivers using the GDL90 protocol.

When used as part of a compatible AV-30-C installation, AV-Link supports the display of live ADS-B traffic information and enables wireless firmware updates through its embedded web interface. The module is FAA PMA approved.

  • Manufacturer: uAvionix
  • Manufacturer part number: UAX-90090-01
  • Product: AV-Link PMA Wi-Fi module
  • Designed for: AV-30-C
  • Supports compatible GDL90 Wi-Fi ADS-B receivers
  • Supports wireless AV-30-C firmware updates

Refer to the applicable current uAvionix AV-30-C Installation Manual, Pilot’s Guide, and AV-Link PMA documentation for approved installation, configuration, operating limitations, and continued-airworthiness requirements.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.