Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

True Blue Power USB Charging Port TA202 6430202-12

https://www-old.roctexo.com/web/image/product.template/49546/image_1920?unique=8ef9bbe
Part numbers : RX1-11-16389 , 6430202-12 , 11-16389
Unit of Measure: EA

355.46 EUR / EA 355.46 EUR 355.46 € excl. VAT

355.46 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The True Blue Power TA202, manufacturer part number 6430202-12, is a dual USB charging port for aircraft cabin, cockpit and in-seat power installations. This illuminated configuration combines one USB Type-A and one USB Type-C outlet with a bottom power connector.

Designed for 10–32 VDC electrical systems, the TA202 provides 5 VDC output at up to 3.0 A (15 W) per port, allowing two connected USB devices to be charged simultaneously at full rated output. The compact unit incorporates protection against short circuit, over-current and over-temperature conditions, without requiring an external power converter.

  • Manufacturer part number: 6430202-12
  • Series: True Blue Power TA202 High Power USB Charging Port
  • Ports: dual USB Type-A and USB Type-C
  • Illuminated outlets
  • Power input: 10–32 VDC
  • USB output: 5 VDC ±0.25 V; up to 3.0 A / 15 W per port
  • Power connector location: bottom
  • FAA TSO-C71 certified; RTCA DO-160G qualified

For installation and operating information, refer to the True Blue Power TA202 Series Installation Manual and Operating Instructions, Manual 9017899.

Manufacturer TA202 Series product information

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.