Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Trig TX57 COMMWith Custom Harness With Jacks Single Com

https://www-old.roctexo.com/web/image/product.template/114608/image_1920?unique=8ef9bbe
Part numbers : RX1-11-17097 , ASA-00330-CU , 11-17097
Unit of Measure: EA

4394.19 EUR / EA 4394.19 EUR 4,394.19 € excl. VAT

4394.19 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Trig TX57 is a slimline, high-power 8.33 kHz Nav/Com for 22–33 V aircraft electrical systems. This configuration, identified by manufacturer part number ASA-00330-CU, is supplied with a custom harness and headset jacks for a single-Com installation.

Designed for modernising an avionics stack, the TX57 combines VHF communications and navigation capability in a 33 mm-high unit. The radio provides 16 W nominal transmit power and supports practical operating features including Dual Watch, Push Step frequency tuning, playback of the last received transmission, a front-panel USB frequency database, and an integrated two-place intercom with stereo music input.

  • Manufacturer: Trig Avionics
  • Manufacturer part number: ASA-00330-CU
  • Roctexo part number: RX1-11-17097
  • TX57 8.33 kHz Nav/Com
  • 16 W nominal transmitter output
  • 22–33 V DC supply requirement
  • Custom harness with headset jacks for single-Com configuration
  • Slimline 33 mm-high format

Please consult the applicable Trig installation documentation and approved installation data to confirm configuration, wiring, and suitability for the intended aircraft installation.

Documentation: Trig TX56/TX57 Nav/Com product information and Trig installation and user manuals.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.