Skip to Content
  1. All Products
  2. All Products
  3. Trig TT21 Remote
Select currency EUR
Trig TT21 Remote

Image for illustration only. It may show a product series rather than the exact product offered.

Trig TT21 Remote

https://www-old.roctexo.com/web/image/product.template/65858/image_1920?unique=cd08963
Part number : RX1-11-16847
Unit of Measure: EA

1783.35 EUR / EA 1783.35 EUR 1,783.35 € excl. VAT

1783.35 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Trig TT21 Remote is the remotely mounted hardware unit for a Trig TT21 compact transponder installation. In the TT21 two-part architecture, the remote unit contains the transponder power supply and receiver/transmitter functions, while system operation is managed through the applicable control interface.

This item is suitable for maintenance replacement or completion of an existing TT21 installation where the correct associated controller, mounting provisions, wiring and approved installation data are available.

  • Product: Trig TT21 Remote
  • Roctexo part number: RX1-11-16847
  • TT21 system type: Class 2 Mode S transponder platform
  • TT21 platform capability: 1090ES ADS-B Out capable when installed and configured as applicable

For installation, operation and continued-airworthiness reference, consult the current TT21/TT22 operating manual, installation manual and applicable Trig documentation before fitting.

Note: Trig currently identifies the TT21 and TT22 product range as no longer manufactured. Verify configuration, software status and documentation applicability for the individual aircraft installation.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.