Skip to Content
  1. All Products
  2. All Products
  3. Trig Transponder/DME Antenna - Blade - TA14
Select currency EUR
Trig Transponder/DME Antenna - Blade - TA14

Image for illustration only. It may show a product series rather than the exact product offered.

Trig Transponder/DME Antenna - Blade - TA14

https://www-old.roctexo.com/web/image/product.template/290808/image_1920?unique=8ef9bbe
Part numbers : RX1-11-21117 , 02449-00 , 11-21117
Unit of Measure: EA

202.17 EUR / EA 202.17 EUR 202.17 € excl. VAT

202.17 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Trig Avionics TA14 is a blade-type antenna for transponder and DME installations. Its streamlined design incorporates longer mounting studs to support installation flexibility on metal-skinned and composite aircraft.

Manufacturer part number: 02449-00.

  • Frequency range: 960–1220 MHz
  • 50 ohm nominal impedance; 1.5:1 maximum VSWR
  • Vertical polarisation with omni-directional pattern
  • BNC female connector
  • RF power capacity: 2.5 kW peak
  • Approximate antenna height: 86 mm; antenna weight: 90 g
  • Specified by Trig for operation up to 350 mph (approximately 563 km/h) and 50,000 ft (approximately 15,240 m)

Trig states that the TA14 may also be used for DME applications. For composite-aircraft installation, refer to the manufacturer’s instructions regarding the required metallic ground plane. Installation should be performed in accordance with the applicable approved maintenance data and the aircraft installation requirements.

The manufacturer specifies an installation kit, installation guide and FAA 8130 certification/approval documentation with the TA14. Manufacturer product information | TA14 Installation Guide

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.