Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Trig TN70A ADS-B Out System

https://www-old.roctexo.com/web/image/product.template/133347/image_1920?unique=8ef9bbe
Part numbers : RX1-11-19363 , 02466-00 , 11-19363
Unit of Measure: EA

2661.77 EUR / EA 2661.77 EUR 2,661.77 € excl. VAT

2661.77 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Trig TN70A is an SBAS GPS receiver kit designed to provide a certified GPS position source for a Trig ADS-B Out installation. It is supplied as manufacturer part number 02466-00 and includes the Trig TA70 certified GPS antenna.

The receiver supports EGNOS, GAGAN, MSAS and WAAS satellite-based augmentation systems. Its compact, remote-mounted format requires no panel space, helping support tidy avionics installations where panel capacity is limited.

  • SBAS GPS receiver for Trig ADS-B Out system installations
  • Supplied with TA70 certified GPS antenna and installation kit
  • TSO-C145c Beta 1 receiver
  • Published compliance: DO-229D, DO-178B Level C, DO-254 Level C and DO-160F
  • Supply voltage: 9–32 V DC
  • Typical current consumption at 14 V: 0.2 A; maximum 0.3 A
  • Operating temperature: −55 °C to +70 °C
  • Approximate receiver dimensions: 41 × 105 × 165 mm
  • Approximate receiver weight: 0.48 kg

The TN70A is intended to be used with a suitable Trig transponder; confirm installation configuration, aircraft eligibility and applicable ADS-B requirements with appropriately qualified avionics personnel before installation.

Manufacturer documentation includes the TN70A Installation Manual. View the TN70A Installation Manual from Trig Avionics.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.