Skip to Content
  1. All Products
  2. All Products
  3. Trans-Cal Altimeter Encoder 35K SSD120-35N
Select currency EUR
Trans-Cal Altimeter Encoder 35K SSD120-35N

Image for illustration only. It may show a product series rather than the exact product offered.

Trans-Cal Altimeter Encoder 35K SSD120-35N

https://www-old.roctexo.com/web/image/product.template/121118/image_1920?unique=8ef9bbe
Part numbers : RX1-11-09608 , SSD120-35N , 11-09608
Unit of Measure: EA

430.47 EUR / EA 430.47 EUR 430.47 € excl. VAT

430.47 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 1 EA ready to ship on Thursday 2026-11-12
Order before 16:00 CET Today

The Trans-Cal SSD120-35N is a solid-state altitude encoder for converting aircraft static-system pressure information into digital pressure-altitude data. This 35K model is specified for an operating altitude range of -1,000 to +35,000 ft.

Manufacturer part number: SSD120-35N
Roctexo part number: RX1-11-09608

  • Solid-state altitude encoder
  • ICAO parallel pressure-altitude grey-code output
  • RS-485 compliant data output
  • Dual 1/8-27 NPT static-port inlets
  • Power, ground and data I/O via industry-standard D-subminiature connectors
  • Operating voltage: +10 to +33 VDC
  • Operating temperature range: -20°C to +70°C
  • FAA TSO-C88a and EASA ETSO-C88a approved

The supplied product information identifies mating connectors with cable clamps and a mounting bracket as included. Refer to the applicable Trans-Cal installation documentation for configuration, wiring and installation requirements.

Manufacturer documentation: Trans-Cal SSD120-N series outline drawing

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.