Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Trans-Cal Altimeter Digitizer Ssd-120-35C-RS232

https://www-old.roctexo.com/web/image/product.template/73945/image_1920?unique=8ef9bbe
Part numbers : RX1-11-15366 , SSD120-35C-RS232 , 11-15366
Unit of Measure: EA

261.37 EUR / EA 261.37 EUR 261.37 € excl. VAT

261.37 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 28 EA ready to ship on Thursday 2026-11-12
Order before 16:00 CET Today
Up to 39 EA ready to ship on Monday 2026-11-16
Order before 16:00 CET Today
38 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Trans-Cal SSD120-35C-RS232 is a solid-state altitude encoder/digitizer designed to convert pressure-altitude information into digital output data for aircraft avionics installations.

It provides one ICAO parallel pressure-altitude output and two asynchronous RS232 serial altitude-data outputs. Serial resolution is supplied at 10 ft, with 10 ft or 100 ft resolution selectable through internal shunts. The unit has an operating pressure-altitude range of -1,000 to +35,000 ft.

  • Manufacturer part number: SSD120-35C-RS232
  • One ICAO pressure-altitude gray-code output
  • Two asynchronous RS232 serial altitude-data outputs
  • 1/8-27 NPT static port inlet
  • FAA TSO-C88a and EASA ETSO-C88a approved
  • Power and data connections via D-subminiature connector

Installation and configuration should be performed by qualified avionics personnel in accordance with the applicable installation manual.

Manufacturer documentation: Trans-Cal SSD120-35C-RS232 Owner/Installation Manual.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.