Skip to Content
  1. All Products
  2. All Products
  3. Threaded Rod Ends AN490HT15P
Select currency EUR
Threaded Rod Ends AN490HT15P

Image for illustration only. It may show a product series rather than the exact product offered.

Threaded Rod Ends AN490HT15P

https://www-old.roctexo.com/web/image/product.template/44924/image_1920?unique=31ae312
Part numbers : RX1-AN490HT15P , 19702-1 , AN490HT15P
Unit of Measure: EA

20.37 EUR / EA 20.37 EUR 20.37 € excl. VAT

20.37 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 8 EA ready to ship on Thursday 2026-11-19
Order before 16:00 CET on Tuesday 2026-11-17
6 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The AN490HT15P threaded rod end is a steel tube-end fitting with a 5/16-24 threaded end. It is specified for use with 12.7 mm outside-diameter steel tubing with a 1.47 mm wall thickness.

Manufactured from 4130 steel, this rod end is heat treated and cadmium plated. The stated minimum tensile strength is 862 MPa (125,000 psi).

  • Part number: AN490HT15P
  • Manufacturer part number: 19702-1
  • Thread: 5/16-24
  • Tube size: 12.7 mm OD × 1.47 mm wall
  • Material: 4130 steel
  • Finish: Cadmium plated
  • Stated minimum tensile strength: 862 MPa

Suitable for welding to steel tubing or riveting to aluminium tubing, subject to the applicable design data and maintenance requirements.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.