Skip to Content
  1. All Products
  2. All Products
  3. Tanis Preheater Rotax 912/914 230V
Select currency EUR
Tanis Preheater Rotax 912/914 230V

Image for illustration only. It may show a product series rather than the exact product offered.

Tanis Preheater Rotax 912/914 230V

https://www-old.roctexo.com/web/image/product.template/92505/image_1920?unique=8ef9bbe
Part numbers : RX1-08-07395-230-1 , TSP4CYL-2579-230 , 08-07395-230-1
Unit of Measure: EA

1063.80 EUR / EA 1063.8 EUR 1,063.80 € excl. VAT

1063.80 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Tanis Preheater, manufacturer part number TSP4CYL-2579-230, is a 230 V engine preheat kit specified for four-cylinder Rotax 912/914 series engines.

The multi-point system uses electrical resistance heating elements at the cylinder assemblies, a threaded heating element at the engine crankcase/oil-pump area, and a bonded pad element on the oil tank. This configuration is designed to preheat the engine and associated components while connected to an external power source.

  • 230 V Tanis engine preheat system
  • For four-cylinder Rotax 912/914 series engines
  • Heating elements for cylinder assemblies, crankcase/oil-pump area and oil tank
  • Dedicated wiring assembly with power indication and circuit overload protection
  • Self-regulating system design

Refer to the applicable Tanis installation instructions, operating guide and aircraft or engine maintenance data before installation or operation.

Manufacturer part number: TSP4CYL-2579-230

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.