Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Spike-D Ave-OvubwB24C-20A

https://www-old.roctexo.com/web/image/product.template/114507/image_1920?unique=8ef9bbe
Part numbers : RX1-11-14460 , AVE-OVUBWB24C-20A , 11-14460
Unit of Measure: EA

207.31 EUR / EA 207.31 EUR 207.31 € excl. VAT

207.31 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Aveo Engineering Spike-D is a compact two-channel EMI and overvoltage protection module for 9–36 VDC electrical systems. Manufacturer part number: AVE-OVUBWB24C-20A.

Designed with two protected output channels, the module provides input-voltage, reverse-connection and over-current protection, together with radio-frequency emission filtration specified by the manufacturer as more than 10 dB to DO-160G Chapter 21.

  • Operating voltage range: 9–36 VDC
  • Two channels; continuous output current: 4 A per channel
  • Pulsed output current: 5 A per channel
  • Transient-voltage capability: 150 V for a maximum of 2 seconds, both polarities
  • Under-voltage lockout/restart: 7.4 V / 8.2 V
  • Over-voltage lockout/restart: 44.3 V / 41.6 V
  • Reverse-connection protection: at least 80 V
  • Over-current protection: at least 5 A
  • Operating temperature: −40 °C to +85 °C
  • Dimensions: 80.4 × 31.4 × 23 mm
  • FEP high-temperature 20 AWG wiring; minimum wire length 280 mm

The input and output wiring uses separate black return wires. Follow the manufacturer installation instructions; the input-side and output-side black wires must not be connected together.

Documentation: Aveo Engineering Spike-D specification and installation sheet.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.