Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Sigma-Tek 3-1/8 Dg 4000H Ap Output Bootstrap

https://www-old.roctexo.com/web/image/product.template/80799/image_1920?unique=8ef9bbe
Part numbers : RX1-10-05142 , 1U262-031-1 , 10-05142
Unit of Measure: EA

3231.71 EUR / EA 3231.71 EUR 3,231.71 € excl. VAT

3231.71 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Sigma-Tek 4000H is a lighted 3-1/8 directional gyro with heading synchro output for supplying aircraft-heading information to connected heading-stabilisation and navigation display systems.

Manufacturer part number 1U262-031-1 identifies the 4000H configuration with no autopilot interface, an orange aircraft/index marker, white dial markings, and lighting provision.

  • Model: 4000H bootstrap directional gyro
  • Manufacturer part number: 1U262-031-1
  • Heading synchro output with ARINC-characteristic index and rotation reference
  • 26 VAC, 400 Hz synchro requiring external excitation from the receiving system or an independent inverter
  • Lighted instrument; lamp tray is not included
  • Approximate maximum dimensions: 83 mm high × 86 mm wide × 170 mm deep
  • Approximate maximum weight: 1.1 kg
  • Connector: S24008-002

Please verify the part number, electrical interface, required excitation source, lighting configuration, connector pin-out, and installation data against the applicable aircraft and equipment documentation before installation.

Relevant manufacturer documentation: Sigma-Tek Drawing Package No. 79 identifies this configuration as a non-autopilot, lighted 4000H directional gyro and references maintenance manual 86M021.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.