Skip to Content
  1. All Products
  2. All Products
  3. SCEET-20 Ducting 5 5Ft
Select currency EUR
SCEET-20 Ducting 5 5Ft

Image for illustration only. It may show a product series rather than the exact product offered.

SCEET-20 Ducting 5 5Ft

https://www-old.roctexo.com/web/image/product.template/57038/image_1920?unique=ca3e318
Part numbers : RX1-05-30620-5 , 05-30620-5
Unit of Measure: EA

221.17 EUR / EA 221.17 EUR 221.17 € excl. VAT

221.17 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 33 EA ready to ship on Monday 2026-11-16
Order before 17:00 CET on Friday 2026-11-13
16 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

SCEET-20 is a flexible, high-temperature ducting hose supplied as a 1.5 m length with a nominal 127 mm internal diameter.

Its construction uses two layers of high-temperature-resistant fibreglass reinforcement with a silicone-rubber coating and a concealed steel-wire helix within the hose wall. This provides a flexible ducting solution for hot-air and gas-routing installations, extraction of fumes near discharge areas, and protection of electrical cables routed through high-temperature zones.

  • Type: SCEET-20 flexible ducting
  • Nominal internal diameter: 127 mm
  • Supplied length: approximately 1.5 m
  • Construction: silicone-coated fibreglass with internal steel-wire reinforcement
  • Operating temperature range: -55 °C to +260 °C
  • Short-duration temperature capability: up to +300 °C

Please confirm the required diameter, installation routing, temperature exposure, and applicable aircraft maintenance data before use.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.