Skip to Content
  1. All Products
  2. All Products
  3. Scat-6 Ducting 1 1/2"
Select currency EUR
Scat-6 Ducting 1 1/2"

Image for illustration only. It may show a product series rather than the exact product offered.

Scat-6 Ducting 1 1/2"

https://www-old.roctexo.com/web/image/product.template/88099/image_1920?unique=792b060
Part numbers : RX1-05-29906 , 510010000038 , 05-29906
Unit of Measure: FT

36.84 EUR / FT 36.84 EUR 36.84 € excl. VAT

36.84 EUR / FT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 229 FT ready to ship on Thursday 2026-11-12
Order before 16:00 CET Today
Up to 742 FT ready to ship on Monday 2026-11-16
Order before 16:00 CET Today
701 FT available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

SCAT-6 flexible ducting for high-temperature air and gas-routing installations. This 1 1/2 in size corresponds to a nominal 38 mm internal diameter and is supplied by the foot.

The ducting uses a single-ply, silicone-coated fibreglass construction with a visible steel-wire helix, combining flexibility with resistance to thermal ageing. Suitable where flexible routing is required for hot-air, ventilation, cooling or fume-extraction duct runs, subject to installation design and applicable maintenance data.

  • Nominal diameter: 38 mm (1 1/2 in)
  • Temperature range: -55 °C to +260 °C continuous; short-duration exposure up to +300 °C
  • Construction: silicone-coated fibreglass with visible steel-wire reinforcement
  • Unit of measure: foot
  • Manufacturer part number: 510010000038

Please verify diameter, routing, temperature exposure and applicable approval requirements before installation.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.