Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

SCAT-10 Ducting 2 1/2 13Ft

https://www-old.roctexo.com/web/image/product.template/12108/image_1920?unique=b9b3aa8
Part numbers : RX1-05-29910-13 , OPS10X144 , 05-29910-13
Unit of Measure: EA

183.81 EUR / EA 183.81 EUR 183.81 € excl. VAT

183.81 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 41 EA ready to ship on Thursday 2026-11-12
Order before 16:00 CET Today
Up to 125 EA ready to ship on Monday 2026-11-16
Order before 16:00 CET Today
38 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

SCAT-10 flexible ducting for high-temperature air and gaseous-fluid routing. This 13 ft (approx. 4 m) length has a nominal 2½ in (approx. 64 mm) diameter and is identified by manufacturer part number OPS10X144.

The ducting uses high-temperature silicone-coated fibreglass construction with a visible steel-wire helix, providing flexibility during installation and resistance to thermal ageing. It is suitable for applications requiring flexible routing of hot air or gases, subject to confirmation of installation suitability and applicable approval requirements.

  • Nominal diameter: 2½ in (approx. 64 mm)
  • Length: 13 ft (approx. 4 m)
  • Operating temperature range: -55 °C to +260 °C
  • Construction: single-ply silicone-coated fibreglass with visible steel-wire reinforcement
  • Manufacturer part number: OPS10X144
  • Roctexo part number: RX1-05-29910-13

Manufacturer technical information for the Vena HT ducting construction is available from Venair: Vena HT/HTD product information.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.