Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Royco Lubricant 363 - MIL-PRF-7870 - Single Gallon

https://www-old.roctexo.com/web/image/product.template/48554/image_1920?unique=8ef9bbe
Part numbers : RX1-08-16236-1 , 58322548 , 62627592 , 08-16236-1
Unit of Measure: EA

96.37 EUR / EA 96.37 EUR 96.37 € excl. VAT

96.37 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 25 EA ready to ship on Thursday 2026-11-12
Order before 16:00 CET Today
Up to 32 EA ready to ship on Monday 2026-11-16
Order before 16:00 CET Today
13 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

ROYCO® 363 is a general-purpose, low-temperature lubricating oil for aviation instruments and airframe components. This single-gallon container is identified by manufacturer part numbers 58322548 and 62627592.

Formulated from highly refined mineral oil with oxidation, corrosion and rust-inhibiting additives, ROYCO® 363 is intended for lubrication of components such as bearings, actuators, hinges and latches where the applicable maintenance data calls for this lubricant.

  • Meets the requirements of MIL-PRF-7870E
  • NATO code: O-142
  • General-purpose, low-temperature lubricating oil
  • Published operating-temperature range: -54 °C to +120 °C
  • Designed to provide low-temperature fluidity and resistance to evaporation
  • Single-gallon container

Use only in accordance with the applicable approved maintenance data and the current product technical documentation. The manufacturer notes that use at high temperatures may require frequent re-lubrication.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.