Skip to Content
  1. All Products
  2. All Products
  3. Royal A&S WS-8070 B-2 Corrosion Inhibitive Sealant - Quart Kit
Select currency EUR
Royal A&S WS-8070 B-2 Corrosion Inhibitive Sealant - Quart Kit

Image for illustration only. It may show a product series rather than the exact product offered.

Royal A&S WS-8070 B-2 Corrosion Inhibitive Sealant - Quart Kit

https://www-old.roctexo.com/web/image/product.template/48773/image_1920?unique=1cab41c
Part numbers : RX1-09-06033 , WS8070B2 QT , WS8070B2-QT , 09-06033
Unit of Measure: EA

186.70 EUR / EA 186.7 EUR 186.70 € excl. VAT

186.70 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

Royal Adhesives & Sealants WS-8070 B-2 is a two-part, manganese-cured polysulfide sealant supplied as a quart kit. It is designed for corrosion-inhibitive fillet and faying-surface sealing of aircraft structures, helping to limit corrosion associated with water intrusion and dissimilar-metal contact.

  • Manufacturer part numbers: WS8070B2 QT; WS8070B2-QT
  • B-2 class with a typical application life of 2 hours at 25 °C and 50% relative humidity
  • Thixotropic, non-sag paste consistency for extrusion-gun or spatula application
  • Mixed colour: grey
  • Typical cure time to 30 Shore A: 48 hours at 25 °C and 50% relative humidity
  • Published technical data states qualification to MIL-PRF-81733

Refer to the current technical data sheet, safety data sheet and applicable approved maintenance data for surface preparation, mixing, application, cure conditions and suitability for the intended task.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.