Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Royal A&S WS-8020RC B-1/2 Rapid Cure Fuel Tank Sealant - 3.5 Oz. Cartridge

https://www-old.roctexo.com/web/image/product.template/89216/image_1920?unique=5dcd44c
Part numbers : RX1-09-06015 , WS8020RCB1/2 6OZ , WS8020RCB1/2-6 , 09-06015
Unit of Measure: EA

66.12 EUR / EA 66.12 EUR 66.12 € excl. VAT

66.12 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

Royal Adhesives & Sealants WS-8020RC B-1/2 is a rapid-cure, two-component polysulfide sealant supplied in cartridge format for fuel-tank and fuselage sealing work.

This Class B, dark-grey, low-sag thixotropic paste is intended for extrusion-gun or spatula application. The manufacturer describes the cured sealant as providing fuel resistance and elastomeric performance following exposure to jet fuel and aviation gasoline, with resistance also stated for water, alcohols, synthetic oils and petroleum-based hydraulic fluids.

  • Rapid-cure Class B polysulfide sealant
  • B-1/2 application-life designation
  • Low-sag paste consistency for controlled application
  • Documented for AMS-3276 and AMS-S-8802 Type 2 qualification requirements; FMS-1044 qualification is stated for B-1/2 and B-2 grades
  • Manufacturer part numbers: WS8020RCB1/2 6OZ; WS8020RCB1/2-6
  • Roctexo part number: RX1-09-06015

Consult the applicable technical data sheet and safety data sheet before use, and confirm the required material specification and maintenance data for the intended task.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.