Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Radiorax RK2025 Kit

https://www-old.roctexo.com/web/image/product.template/65653/image_1920?unique=e658374
Part numbers : RX1-11-02611 , RK2025 , 11-02611
Unit of Measure: EA

561.06 EUR / EA 561.06 EUR 561.06 € excl. VAT

561.06 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Radiorax RK2025 is a dual-stack avionics tray-mount kit designed for panel-mounted avionics installations. It uses the Radiorax slotted-rail mounting concept, allowing tray positions to be set and adjusted during installation.

This RK2025 configuration is identified as an approximately 457 mm dual-stack kit with reduced outer rails and a reduced-dimension centre rail. The rail system is intended to support an organised avionics stack and facilitate future tray repositioning or reconfiguration where permitted by the applicable installation data.

  • Manufacturer part number: RK2025
  • Roctexo part number: RX1-11-02611
  • Dual-stack tray-mount configuration
  • Approximate rail length: 457 mm
  • Reduced outer rails and reduced-dimension centre rail
  • Referenced installation documentation includes an installation manual, parts manual and instructions for continued airworthiness.

Manufacturer catalogue material identifies the RK2025 as FAA-PMA and STC’d. For European installations, confirm the applicable certification basis, approved installation data and aircraft-specific eligibility with an appropriately authorised maintenance or design organisation before installation.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.