Skip to Content
  1. All Products
  2. All Products
  3. Quiet Power Charger Assembly Lit 12 Volts Qp-104L
Select currency EUR
Quiet Power Charger Assembly Lit 12 Volts Qp-104L

Image for illustration only. It may show a product series rather than the exact product offered.

Quiet Power Charger Assembly Lit 12 Volts Qp-104L

https://www-old.roctexo.com/web/image/product.template/89714/image_1920?unique=33298cd
Part numbers : RX1-11-13843 , 70-790013-L , 11-13843
Unit of Measure: EA

296.17 EUR / EA 296.17 EUR 296.17 € excl. VAT

296.17 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Quiet Power QP-104L is a lighted charging assembly intended for cockpit or cabin installation. It provides two standard USB-A charging ports together with a 12 VDC auxiliary charging output, supporting the charging of USB-powered equipment and compatible auxiliary devices.

Manufacturer part number: 70-790013-L
Roctexo part number: RX1-11-13843

  • Two USB-A outputs: 2.1 A at 5 VDC and 1.0 A at 5 VDC
  • Auxiliary output: 1.0 A at 12 VDC
  • Input range: 13.2–36 VDC; maximum input current: 5 A
  • Lighted connector openings for improved port visibility
  • Over-current, short-circuit and over-temperature protection
  • Approximate dimensions: 36 × 46 × 36 mm (W × H × D)
  • Listed RTCA DO-160G qualification categories include temperature and altitude, temperature variation, power input, and radio-frequency emissions.

Installation approval, airworthiness suitability and the applicable regulatory basis must be determined by the installing organisation or operator.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.