Skip to Content
  1. All Products
  2. All Products
  3. Pulleys MS20220-1
Select currency EUR
Pulleys MS20220-1

Image for illustration only. It may show a product series rather than the exact product offered.

Pulleys MS20220-1

https://www-old.roctexo.com/web/image/product.template/28281/image_1920?unique=8ef9bbe
Part numbers : RX1-MS20220-1 , MS20220-1 , MS20220-1
Unit of Measure: EA

49.45 EUR / EA 49.45 EUR 49.45 € excl. VAT

49.45 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 28 EA ready to ship on Monday 2026-11-16
Order before 17:00 CET on Friday 2026-11-13
193 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The MS20220-1 is a phenolic flight-control pulley fitted with a sealed ball bearing. It is identified by part number MS20220-1 and is intended for cable-control installations when specified by the applicable approved maintenance or design data.

  • Phenolic pulley body
  • Sealed ball bearing
  • Suitable for 3.2 mm, 4.0 mm and 4.8 mm cable diameters
  • Groove diameter: approximately 44.6 mm
  • Hub diameter: approximately 31.9 mm
  • Bore diameter: approximately 7.9 mm
  • Width: approximately 15.9 mm
  • Listed load limit: 500 lb (approximately 2.2 kN)
  • Product weight: approximately 0.091 kg

For frequently used aircraft controls, the stated guidance for the -1 pulley limits cable wrap to no more than 15° from a straight line because the allowable load is affected by cable-fatigue considerations. Confirm fit, installation orientation and suitability against the applicable technical data before installation.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.