Skip to Content
  1. All Products
  2. All Products
  3. Pt-100-1 Pneuhyd Blind Riveter
Select currency EUR
Pt-100-1 Pneuhyd Blind Riveter

Image for illustration only. It may show a product series rather than the exact product offered.

Pt-100-1 Pneuhyd Blind Riveter

https://www-old.roctexo.com/web/image/product.template/26484/image_1920?unique=8ef9bbe
Part numbers : RX1-09-01070 , PT-100-1 , 09-01070
Unit of Measure: EA

791.86 EUR / EA 791.86 EUR 791.86 € excl. VAT

791.86 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The PT-100-1 is a compact pneumatic-hydraulic blind riveter designed for installing straight-pull blind rivets. Its two-valve hydraulic pump is actuated by a 90–130 psig air supply, while the collect/jaw assembly remains stationary and the outer sleeve-nosepiece assembly moves hydraulically to apply the installation load.

Suitable for maintenance and workshop riveting tasks where a powered blind-rivet installation tool is required, the PT-100-1 is stated to install blind rivets with installation loads up to 3,500 lbf. The supplied information indicates support for blind rivets from 3/32 in diameter through 1/4 in diameter, including CherryMAX rivets within that range.

  • Manufacturer part number: PT-100-1
  • Pneumatic-hydraulic operation
  • Air pressure requirement: 90–130 psig
  • Stated installation load: up to 3,500 lbf
  • Supplied with nosepieces for 3/32 in, 1/8 in, 3/16 in and 1/4 in rivets

Confirm the required rivet type, diameter, installation load and applicable maintenance data before use.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.