Skip to Content
  1. All Products
  2. All Products
  3. Pro Seal Corrosion Inhibitive Sealant 870 B 1/2 Quart
Select currency EUR
Pro Seal Corrosion Inhibitive Sealant 870 B 1/2 Quart

Image for illustration only. It may show a product series rather than the exact product offered.

Pro Seal Corrosion Inhibitive Sealant 870 B 1/2 Quart

https://www-old.roctexo.com/web/image/product.template/61366/image_1920?unique=8ef9bbe
Part number : RX1-09-06054
Unit of Measure: EA

498.36 EUR / EA 498.36 EUR 498.36 € excl. VAT

498.36 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

Pro Seal P/S 870 Class B-1/2 is a two-part, manganese-dioxide-cured polysulfide sealant formulated for corrosion-inhibitive sealing applications. Supplied as a 1/2 quart kit.

The low-sag, thixotropic paste is suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient, elastomeric sealant with adhesion to common aircraft substrates.

  • Corrosion-inhibitive sealant for aluminium alloys and interfaces between dissimilar metals
  • Class B-1/2 application life: typically 30 minutes at 25 °C and 50% relative humidity
  • Typical service-temperature range: -54 °C to +121 °C, with intermittent exposure up to +135 °C
  • Cured material retains elastomeric properties after limited exposure to jet fuel and aviation gasoline
  • Roctexo part number: RX1-09-06054
  • Unit of measure: each

Use only in accordance with the applicable approved maintenance data and the manufacturer’s current technical and safety documentation. PPG P/S 870 Class B Technical Data Sheet

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.