Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Powervamp GPU1500/40 Base With 16.4Foot Tank/Intravehicular Output +SB350 And Us Input

https://www-old.roctexo.com/web/image/product.template/81173/image_1920?unique=33699c7
Part numbers : RX1-11-18595 , 11-18595
Unit of Measure: EA

5790.56 EUR / EA 5790.56 EUR 5,790.56 € excl. VAT

5790.56 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Powervamp GPU1500/40 is a portable 28 V DC aircraft ground power unit combining continuous DC power capability with an integrated aircraft-start battery system. This configuration is supplied with an approximately 5 m tank/intravehicular output, SB350 and US input.

Designed around dual internal 20 A power modules, the GPU1500/40 provides up to 40 A continuous 28 V DC output when connected to mains power. Powervamp specifies sealed lead-acid AGM batteries, LED power-supply status indication and a solid-state voltmeter with push-to-view function for straightforward operational monitoring.

  • 40 A continuous 28 V DC internal power supply/charger
  • Dual 20 A internal power modules
  • Sealed lead-acid AGM battery system
  • Corrosion-resistant aluminium case with carry handle
  • LED output-status monitoring and solid-state voltmeter
  • Spring-loaded output-connector cover and shock-absorbing anti-slip feet
  • Product configuration: approximately 5 m tank/intravehicular output, SB350 and US input

Please verify the required aircraft-side connection, input supply and operating procedure against the applicable aircraft and equipment documentation before use.

Manufacturer documentation: Powervamp Aviation Brochure

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.