Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Powervamp GPU 2400 Twin 24V Aircraft Start Unit

https://www-old.roctexo.com/web/image/product.template/114579/image_1920?unique=eebefc0
Part numbers : RX1-11-16342 , 2207186 , 2207186-T , 2210254 , 11-16342
Unit of Measure: PAIR

10408.28 EUR / PAIR 10408.28 EUR 10,408.28 € excl. VAT

10408.28 EUR / PAIR excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Powervamp GPU 2400 Twin is a 24 V DC portable aircraft start unit built around two GPU 2400 modules connected in parallel. It combines increased battery capacity with a split-module configuration for handling and transport.

Designed for demanding ground-support use, the unit features a welded non-magnetic stainless-steel case, heavy-duty NATO aircraft connector, polarized parallel cable and a double trolley. A solid-state LED voltmeter supports battery-voltage monitoring, while the push/pull output isolator has replaceable contacts and a safety R-clip lock.

  • Nominal output: 24 V DC
  • Battery capacity: 86 Ah at the 10-hour rate (20 °C)
  • Published peak current: 4,800 A
  • Battery type: sealed lead-acid AGM
  • Integrated charging: four 12 V, 2.3 A three-stage internal chargers; 90–264 V AC, 47–63 Hz, single phase
  • Aircraft cable: 2 m heavy-duty rubber cable with NATO connector
  • Operating temperature: −40 °C to +50 °C
  • Dimensions: 1,120 × 555 × 465 mm (H × L × W)
  • Weight: approximately 85 kg, including trolley

Manufacturer part numbers: 2207186, 2207186-T and 2210254.

Documentation: Powervamp GPU 2400 Twin technical data sheet.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.