Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Powervamp Coolspool 29 Base Unit-Positive

https://www-old.roctexo.com/web/image/product.template/134096/image_1920?unique=8ef9bbe
Part numbers : RX1-11-20237 , 2207675 , 11-20237
Unit of Measure: EA

2641.43 EUR / EA 2641.43 EUR 2,641.43 € excl. VAT

2641.43 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Powervamp Coolspool 29 Base Unit-Positive is a portable 28 V DC aircraft start unit for aircraft starting and onboard emergency-power use. This Positive configuration is identified by manufacturer part number 2207675.

Designed around sealed lead-acid AGM batteries in a corrosion-resistant aluminium case, the Coolspool 29 combines portable ground-power capability with an integrated charging and voltage-monitoring arrangement. Its carry handle, protective front bars and shock-absorbing anti-slip feet support practical handling in maintenance and ramp environments.

  • Nominal output: 28 V DC
  • Capacity: 26 Ah at the 10-hour rate, at 20 °C
  • Peak current: 2,400 A theoretical instantaneous short-circuit value; this is not representative of power available at the aircraft connector
  • Integrated 1.9 A, three-stage charger for 90–264 V AC, 47–63 Hz, single-phase input
  • Solid-state IP65 voltmeter with push-to-view function
  • 2 m aircraft cable with heavy-duty rubber NATO connector
  • Aluminium case with shock-absorbing feet
  • Approximate dimensions: 405 × 135 × 345 mm (L × W × H)
  • Approximate weight: 29 kg

Manufacturer part number: 2207675
Roctexo part number: RX1-11-20237

Manufacturer documentation: Powervamp Coolspool 29 datasheet

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.