Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Powervamp Coolspool 29 Base 6.5Foot 28V Aircraft Connector + SB350 And Us Input

https://www-old.roctexo.com/web/image/product.template/74006/image_1920?unique=3ccafec
Part numbers : RX1-11-18625 , 11-18625
Unit of Measure: EA

3635.58 EUR / EA 3635.58 EUR 3,635.58 € excl. VAT

3635.58 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Powervamp Coolspool 29 is a hand-portable 28 V DC aircraft start unit for ground-start and onboard emergency-power use. This configured unit is supplied with a 2 m aircraft lead, 28 V aircraft connector, SB350 connection and US input lead.

Its corrosion-resistant aluminium case incorporates shock-absorbing, anti-slip feet and a fixed carry handle. A solid-state IP65 LED voltmeter with push-to-view function supports battery-voltage checks, while the internal 1.9 A three-stage charger provides charging from a 90–264 V AC, 47–63 Hz, single-phase supply.

  • Nominal output: 28 V DC
  • Battery capacity: 26 Ah at the 10-hour rate (20 °C)
  • Published peak current: 2,400 A
  • Aircraft cable length: 2 m with heavy-duty rubber NATO connector
  • Approximate dimensions: 405 mm long × 135 mm wide × 345 mm high
  • Published operating temperature: −40 °C to +45 °C
  • Spring-loaded output cover, auxiliary socket and protective jacket

Roctexo part number: RX1-11-18625.

Please confirm the aircraft-side connector, SB350 interface and mains-input requirements before installation or use.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.