Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Powervamp Coolspool 130 Base With 20Foot 28VDC Output Anderson Connector And 10 Foot Lewden Input

https://www-old.roctexo.com/web/image/product.template/76759/image_1920?unique=8ef9bbe
Part numbers : RX1-11-18523 , 11-18523
Unit of Measure: EA

14716.76 EUR / EA 14716.76 EUR 14,716.76 € excl. VAT

14716.76 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Powervamp Coolspool 130 is a mobile 28 V DC battery ramp cart for aircraft ground-power and starting support. This configuration is supplied with a 6.1 m (20 ft) 28 V DC output lead fitted with an Anderson connector, together with a 3.0 m (10 ft) Lewden input lead.

The Coolspool 130 combines high-discharge sealed AGM battery capacity with an internal 75 A power supply/charger. In Aircraft Mode, the unit can provide up to 75 A of continuous 28 V DC power for supported ground-use tasks such as avionics power and software-update activity.

  • 28 V DC Coolspool 130 battery ramp cart
  • 130 Ah battery capacity
  • Stated peak current: 4,000 A
  • 75 A internal 28 V DC power supply/charger
  • Anderson output connector on 6.1 m (20 ft) output lead
  • Lewden input lead, 3.0 m (10 ft)
  • Sealed lead-acid AGM batteries
  • Galvanised steel frame with alloy panels
  • Solid-state voltmeter/ammeter and heavy-duty output isolator

Roctexo part number: RX1-11-18523.

For manufacturer technical information, see the Powervamp Coolspool 130/260 datasheet.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.