Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Powervamp Coolspool 130 Base With 13Foot 28VDC Output Anderson Connector And 10Foot Lewden Input

https://www-old.roctexo.com/web/image/product.template/74002/image_1920?unique=8ef9bbe
Part numbers : RX1-11-18522 , 11-18522
Unit of Measure: EA

17284.86 EUR / EA 17284.86 EUR 17,284.86 € excl. VAT

17284.86 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Powervamp Coolspool 130 is a mobile 28 V DC battery ground-power cart for ramp and maintenance support. This configured unit is supplied with a 13 ft (approximately 4 m) 28 V DC output lead fitted with an Anderson connector and a 10 ft (approximately 3 m) Lewden input lead.

Based on the Coolspool 130 platform, the cart uses high-discharge sealed AGM batteries with a 130 Ah capacity. Its integral charger/power-supply module supports battery charging and, when selected in Aircraft Mode, continuous 28 V DC aircraft power of up to 75 A for appropriate ground-power tasks.

  • Nominal output: 28 V DC
  • Battery capacity: 130 Ah
  • Internal charger/power supply: 75 A
  • Output configuration: 13 ft (approximately 4 m) lead with Anderson connector
  • Input configuration: 10 ft (approximately 3 m) Lewden input lead
  • Approximate weight: 157 kg
  • Mobile galvanised-frame cart with aluminium panels, pneumatic tyres and removable tow arm

Please verify connector configuration, electrical requirements and applicable aircraft maintenance data before use.

Manufacturer documentation: Powervamp Coolspool 130 / 260 product data sheet.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.