Skip to Content
  1. All Products
  2. All Products
  3. Poly-Fiber Mark II 205 Bermuda Tan Gal
Select currency EUR
Poly-Fiber Mark II 205 Bermuda Tan Gal

Image for illustration only. It may show a product series rather than the exact product offered.

Poly-Fiber Mark II 205 Bermuda Tan Gal

https://www-old.roctexo.com/web/image/product.template/69565/image_1920?unique=8039028
Part numbers : RX1-09-03946 , 09-03946
Unit of Measure: EA

645.55 EUR / EA 645.55 EUR 645.55 € excl. VAT

645.55 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

Poly-Fiber Mark II for Metal is a two-part catalysed topcoat in 205 Bermuda Tan, intended for use on properly primed metal or composite parts.

Supplied as a gallon-size three-part kit comprising coloured paint, Mixing Liquid and Mark II Thinner. When the paint is combined with an equal volume of Mixing Liquid, the kit produces approximately 7.6 litres of sprayable coating before any additional thinning.

  • Colour: 205 Bermuda Tan
  • Product range: Poly-Fiber Mark II for Metal
  • Two-part catalysed topcoat
  • For primed metal and composite parts
  • Not for use on fabric or on structures that will subsequently be fabric covered

Refer to the applicable Poly-Fiber product instructions and the aircraft or component maintenance data before use.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.