Skip to Content
  1. All Products
  2. All Products
  3. Poly-Fiber Enamel 219 Jasper Grey Gal
Select currency EUR
Poly-Fiber Enamel 219 Jasper Grey Gal

Image for illustration only. It may show a product series rather than the exact product offered.

Poly-Fiber Enamel 219 Jasper Grey Gal

Hazardous product
Hazardous material Special shipping rules and carrier restrictions may apply.
https://www-old.roctexo.com/web/image/product.template/120515/image_1920?unique=3db61bb
Part numbers : RX1-09-15219-04 , 15-2194 , 09-15219-04
Unit of Measure: USGAL

218.78 EUR / USGAL 218.78 EUR 218.78 € excl. VAT

218.78 EUR / USGAL excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 USGAL available on request, fees apply
Hazardous material special order from vendor stock.

Poly-Fiber Enamel 219 Jasper Grey is a one-part, air-drying alkyd enamel topcoat supplied in a 1 US gallon container.

Designed for use on suitably prepared and primed metal or composite surfaces, this high-gloss enamel is part of the Poly-Fiber colour system. Colour 219 Jasper Grey is matched within the Poly-Tone and Aero-Thane colour range.

  • Manufacturer: Poly-Fiber
  • Manufacturer part number: 15-2194
  • Colour: 219 Jasper Grey
  • Container size: 1 US gallon
  • Finish type: high-gloss, air-drying alkyd enamel
  • Intended substrate: primed metal or composite surfaces
  • Not for use on fabric or on structures to be fabric-covered with Poly-Tak adhesive
  • Hazardous for transport

For best results, follow the manufacturer’s current surface-preparation, mixing, application and safety instructions. Confirm colour against an official Poly-Fiber colour card before final paint selection, as on-screen colour representations may vary.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.