Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Poly-Fiber Enamel 208 Olive Drab Quart

Hazardous product
Hazardous material Special shipping rules and carrier restrictions may apply.
https://www-old.roctexo.com/web/image/product.template/13398/image_1920?unique=16ecdf8
Part numbers : RX1-09-15208-03 , 15-2083 , 09-15208-03
Unit of Measure: QT

62.77 EUR / QT 62.77 EUR 62.77 € excl. VAT

62.77 EUR / QT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
12 QT available on request, fees apply
Hazardous material special order from vendor stock.

Poly-Fiber Enamel 208 Olive Drab is a one-part, air-drying alkyd enamel topcoat in colour 208, identified by the manufacturer as Federal 14087 Olive Drab. Supplied in a quart container.

This high-gloss enamel is intended for use on suitably primed metal or composite/fibreglass surfaces. Poly-Fiber specifies EP-420 Epoxy Primer as the recommended primer system. It is not intended for application over fabric.

  • Manufacturer: Poly-Fiber
  • Manufacturer part number: 15-2083
  • Colour: 208 Olive Drab / Federal 14087
  • Finish type: high-gloss, air-drying alkyd enamel
  • Unit of measure: quart

Follow the applicable Poly-Fiber technical instructions for surface preparation, mixing, thinning and application. The product should be handled in accordance with the relevant safety documentation.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.