Skip to Content
  1. All Products
  2. All Products
  3. Poly-Fiber Enamel 170 Bahama Blue Quart
Select currency EUR
Poly-Fiber Enamel 170 Bahama Blue Quart

Image for illustration only. It may show a product series rather than the exact product offered.

Poly-Fiber Enamel 170 Bahama Blue Quart

Hazardous product
Hazardous material Special shipping rules and carrier restrictions may apply.
https://www-old.roctexo.com/web/image/product.template/23022/image_1920?unique=5787f6f
Part numbers : RX1-09-15170-03 , 15-1703 , 09-15170-03
Unit of Measure: QT

71.24 EUR / QT 71.24 EUR 71.24 € excl. VAT

71.24 EUR / QT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
12 QT available on request, fees apply
Hazardous material special order from vendor stock.

Poly-Fiber Enamel 170 Bahama Blue is a one-part, air-drying alkyd enamel supplied in a quart container. It provides a high-gloss finish for suitably prepared and primed metal or composite surfaces.

This enamel colour is part of the Poly-Fiber colour system and is formulated to match corresponding Poly-Tone and Aero-Thane colours. For best results, use over EP-420 Epoxy Primer in accordance with the applicable Poly-Fiber technical instructions.

  • Colour: 170 Bahama Blue
  • Manufacturer part number: 15-1703
  • Unit size: quart
  • High-gloss, air-drying alkyd enamel
  • Intended for primed metal and composite surfaces
  • Not for use on fabric or on surfaces that will be covered with fabric using Poly-Tak adhesive

Consult the current manufacturer instructions and safety documentation before mixing, application, handling or transport. This product is classified as hazardous for transport.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.