Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

P1 Momen. Switch P1-32122 Blk

https://www-old.roctexo.com/web/image/product.template/106734/image_1920?unique=8ef9bbe
Part numbers : RX1-11-00749 , P1-32122 , ASS-11-00749 , 11-00749
Unit of Measure: EA

24.61 EUR / EA 24.61 EUR 24.61 € excl. VAT

24.61 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 9 EA ready to ship on Monday 2026-11-16
Order before 17:00 CET on Friday 2026-11-13
20 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The OTTO Controls P1-32122 is a P1-series sealed, snap-action momentary pushbutton switch with a black button and black threaded bezel. Also identified as MS25089-1C, this configuration uses a Style C case, standard screw terminals and a single-pole, normally-open contact arrangement.

  • Manufacturer part number: P1-32122
  • Military cross-reference: MS25089-1C
  • Momentary snap-action, SPST normally-open switching
  • Black button with threaded bezel
  • Standard screw terminals
  • 4.0 lbf momentary operating force
  • P1-series sealed contact area and positive tactile feedback
  • Series electrical ratings include 10 A resistive, 5 A inductive and 3 A lamp load at 28 VDC or 115 VAC, 60/400 Hz

Suitable for maintenance and replacement requirements where the specified P1-32122 / MS25089-1C switch configuration is required. Verify the part number, electrical circuit and installation requirements against the applicable approved maintenance data before installation.

Manufacturer documentation: OTTO Controls P1 Pushbutton Switches catalogue.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.