Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

NavStrobe Anti-Collision Green Strobe Light 45W 1350 Leds

https://www-old.roctexo.com/web/image/product.template/93166/image_1920?unique=8ef9bbe
Part numbers : RX1-11-12985 , AC-GS-45W , 11-12985
Unit of Measure: EA

64.32 EUR / EA 64.32 EUR 64.32 € excl. VAT

64.32 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 8 EA ready to ship on Thursday 2026-11-12
Order before 16:00 CET Today
Up to 10 EA ready to ship on Monday 2026-11-16
Order before 16:00 CET Today
5 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The NavStrobe AC-GS-45W is a compact green LED anti-collision strobe light for 10–15 VDC electrical systems. It uses nine 5 W CREE LED emitters and is specified at 45 W with a stated luminous flux of 1,350 lm.

  • Manufacturer part number: AC-GS-45W
  • Green anti-collision strobe light
  • LED emitters: 9 × 5 W CREE LEDs
  • Power: 45 W
  • Rated voltage: 10–15 VDC
  • Strobe mode: fast strobe, stated 100 ms
  • Connection: 30 cm twin leads
  • Not EASA/FAA approved

Suitable where a green LED anti-collision strobe light with the above electrical characteristics is required. Confirm installation requirements, electrical protection and applicability against the aircraft or project documentation before fitment.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Overview

Aircraft Anti-Collision Strobe Light, 45w, 1350 LM CREE LEDs

  • Emitter Type: LED
  • Total Emitters: 9 x 5w
  • Power: 45W Equivalent
  • Rated Voltage: 10-15VDC
  • Draws <280ma @ 14.2VDC
  • Luminous Flux: 1350 LM/108cdl
  • 1 mode: fast strobe (100ms)
  • Base Type: 12"/30cm twin leads
  • Application: Aircraft Anti-Collision Strobe Light
  • Non-PMA'd
  • Contains 1 light bulb per pack
Dimensions: 2.7 in x 1.2 in (60 mm x 30 mm)
Weight: 0.28 oz (8 g)

Installation: 1- Clean surfaces with alcohol. 2- Apply adhesive tape 3- Let stand for 24 hours.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.