Skip to Content
  1. All Products
  2. All Products
  3. Mittler 13Pc Aircraft Punch & Flare Set 1 Thru 4
Select currency EUR
Mittler 13Pc Aircraft Punch & Flare Set 1 Thru 4

Image for illustration only. It may show a product series rather than the exact product offered.

Mittler 13Pc Aircraft Punch & Flare Set 1 Thru 4

https://www-old.roctexo.com/web/image/product.template/32671/image_1920?unique=8321e1a
Part numbers : RX1-12-02796 , 1300-413 , 12-02796
Unit of Measure: EA

2664.55 EUR / EA 2664.55 EUR 2,664.55 € excl. VAT

2664.55 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Mittler Bros. 13-piece AC-35 Aircraft Punch & Flare Set, part number 1300-413, is a sheet-metal tooling set for producing round holes with a low-profile 35° aircraft-style flare in a single operation.

Designed for panel and sheet-metal fabrication work, each tool is used by first drilling a pilot hole for the draw bolt, then tightening the tool to punch and flare the material. The female flare ring can be removed when a punched hole without a flare is required.

  • 13-piece set covering nominal hole sizes from 1 in to 4 in
  • 35° aircraft-style flare geometry
  • Heat-treated steel construction
  • Suitable for use with the supplied draw-bolt arrangement; can also be mounted in compatible Mittler Bros. bench/louver presses

Manufacturer part number: 1300-413.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.