Skip to Content
  1. All Products
  2. All Products
  3. Mil-Dtl-6000D Oil & Coolant Hose 5/16 Id
Select currency EUR
Mil-Dtl-6000D Oil & Coolant Hose 5/16 Id

Image for illustration only. It may show a product series rather than the exact product offered.

Mil-Dtl-6000D Oil & Coolant Hose 5/16 Id

https://www-old.roctexo.com/web/image/product.template/77240/image_1920?unique=8ef9bbe
Part numbers : RX1-6000-5 , 00850721302 , 6000-5
Unit of Measure: FT

10.74 EUR / FT 10.74 EUR 10.74 € excl. VAT

10.74 EUR / FT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 123 FT ready to ship on Thursday 2026-11-12
Order before 16:00 CET Today
Up to 188 FT ready to ship on Monday 2026-11-16
Order before 16:00 CET Today
393 FT available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

MIL-DTL-6000D flexible hose for oil and coolant service, with a 5/16 in (approximately 8 mm) internal diameter. Roctexo part number RX1-6000-5; manufacturer part number 00850721302.

The hose has an oil-resistant tube and a black outer cover reinforced with high-strength, mildew-resistant yarns. It is intended for exposure to oil, alcohol, coolant and water, and is designed for installation where a lightweight, flexible hose is required.

  • Internal diameter: 5/16 in (approximately 8 mm)
  • Outside diameter: 11/16 in (approximately 17.5 mm)
  • Temperature range: −40 to +121 °C
  • Burst pressure: 1,000 psi
  • Supplied by the foot

Not recommended for fuel-line use. Confirm the required hose specification, dimensions, pressure requirements and approved installation data before fitment.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.