Skip to Content
  1. All Products
  2. All Products
  3. MGL M8X1 K-Type Egt Probe With 19mm Tip EGT-SCREW-19MM
Select currency EUR
MGL M8X1 K-Type Egt Probe With 19mm Tip EGT-SCREW-19MM

Image for illustration only. It may show a product series rather than the exact product offered.

MGL M8X1 K-Type Egt Probe With 19mm Tip EGT-SCREW-19MM

https://www-old.roctexo.com/web/image/product.template/288997/image_1920?unique=8ef9bbe
Part numbers : RX1-11-21026 , EGT-SCREW-19MM , 11-21026
Unit of Measure: EA

76.42 EUR / EA 76.42 EUR 76.42 € excl. VAT

76.42 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The MGL Avionics EGT-SCREW-19MM is a screw-in exhaust gas temperature probe with an M8 x 1 fine-pitch thread and a 19 mm probe length, measured from the tip to the start of the thread.

It uses a K-Type thermocouple and features a stainless-steel probe and bolt construction with a 1 m stainless-steel braided cable and solid conductors. Designed for EGT measurement installations requiring this metric threaded probe format.

  • Manufacturer part number: EGT-SCREW-19MM
  • Probe type: screw-in EGT probe
  • Thread: M8 x 1 fine pitch
  • Probe length: 19 mm
  • Thermocouple type: K-Type
  • Cable: 1 m stainless-steel braided cable

Installation position and suitability should be determined in accordance with the applicable engine manufacturer instructions and the installed engine-monitoring system requirements.

Manufacturer technical information: MGL Avionics Probes and Senders

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.