Skip to Content
  1. All Products
  2. All Products
  3. Meyer Tritask Aircraft Jack A725C 25.5 To 42.5
Select currency EUR
Meyer Tritask Aircraft Jack A725C 25.5 To 42.5

Image for illustration only. It may show a product series rather than the exact product offered.

Meyer Tritask Aircraft Jack A725C 25.5 To 42.5

https://www-old.roctexo.com/web/image/product.template/49789/image_1920?unique=6a92d6c
Part numbers : RX1-12-05218 , A725C , 12-05218
Unit of Measure: EA

3330.98 EUR / EA 3330.98 EUR 3,330.98 € excl. VAT

3330.98 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Meyer Hydraulics TriTask A725C is a professional hydraulic aircraft jack from the A700 Series, designed for maintenance lifting operations. It provides a lifting-height range of 65 to 108 cm and a rated capacity of 10,886 kg.

Supplied with the AT-JPR2 jacking point receiver, the A725C forms part of the TriTask system. Its powder-coated inner slide tube incorporates a spring-loaded positive safety lock, while the three-leg frame uses low-height legs, floor pads and spring-loaded casters to support positioning around the hangar.

  • Manufacturer part number: A725C
  • TriTask A700 Series hydraulic aircraft jack
  • Rated capacity: 10,886 kg
  • Lifting-height range with AT-JPR2: 65 to 108 cm
  • Hydraulic stroke: 43 cm
  • Standard AT-JPR2 jacking point receiver
  • Powder-coated inner slide tube with positive safety lock
  • Three-leg frame with six spring-loaded casters

Please verify the required jacking arrangement, aircraft maintenance data and applicable operating procedures before use.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.