Skip to Content
  1. All Products
  2. All Products
  3. McFarlane TransducerOil Press 3060-00018 CA880008-501 FAA-PMA Approved
Select currency EUR
McFarlane TransducerOil Press 3060-00018 CA880008-501 FAA-PMA Approved

Image for illustration only. It may show a product series rather than the exact product offered.

McFarlane TransducerOil Press 3060-00018 CA880008-501 FAA-PMA Approved

This is a special order item. Additional fees may apply. Please contact us for details.
https://www-old.roctexo.com/web/image/product.template/124029/image_1920?unique=58a4767
Part numbers : RX1-05-07319 , CA880008-501 , 05-07319
Unit of Measure: EA

381.92 EUR / EA 381.92 EUR 381.92 € excl. VAT

381.92 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

Oil pressure transducer manufactured by PMA Products and supplied under part number CA880008-501. This FAA-PMA approved component is identified by McFarlane Aviation as a replacement reference for OEM part numbers 3060-00018, 3060-18 and 880008-501.

  • Part number: CA880008-501
  • Component: Oil pressure transducer
  • Approval: FAA-PMA
  • Manufacturer: PMA Products
  • Unit of measure: Each
  • Weight: approximately 0.14 kg
  • Approximate dimensions: 95 × 83 × 64 mm

Manufacturer eligibility information references Mooney M20J aircraft, serial numbers 24-0378 through 24-1382, under Eligibility Chart 6636. This reference is provided for identification only; verify part-number eligibility, configuration and installation data against the applicable approved maintenance documentation before installation.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.