Skip to Content
  1. All Products
  2. All Products
  3. McFarlane Stabilator Cable Kit For Piper PCKT-STAB-01
Select currency EUR
McFarlane Stabilator Cable Kit For Piper PCKT-STAB-01

Image for illustration only. It may show a product series rather than the exact product offered.

McFarlane Stabilator Cable Kit For Piper PCKT-STAB-01

https://www-old.roctexo.com/web/image/product.template/128317/image_1920?unique=3422609
Part numbers : RX1-05-10727 , PCKT-STAB-01 , 05-10727
Unit of Measure: EA

781.20 EUR / EA 781.2 EUR 781.20 € excl. VAT

781.20 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

McFarlane Aviation PCKT-STAB-01 is a Piper stabilator cable kit supplied as a complete set for applicable aircraft identified in the manufacturer’s eligibility documentation.

The kit contains four stabilator cables—two forward and two aft—together with two MS21251-B5S turnbuckle barrels and ten MS21256-1 locking clips.

  • Manufacturer part number: PCKT-STAB-01
  • Manufacturer: McFarlane Aviation
  • Approval status: kit with FAA-PMA approved contents
  • Unit of measure: each
  • Approximate package dimensions: 33 × 28 × 8 cm
  • Weight: approximately 0.74 kg

Please confirm aircraft model, serial-number eligibility, required cable configuration and installation requirements against the current manufacturer eligibility chart and approved maintenance data before purchase or fitment. FAA-PMA status does not by itself confirm EASA approval or suitability for a specific aircraft on an EU register.

Relevant manufacturer reference material includes the product eligibility chart, FAA Airworthiness Directive 2013-02-13 and Piper Service Bulletin 1245A.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.