Skip to Content
  1. All Products
  2. All Products
  3. McFarlane Push To Unlock MC6160-071BB096
Select currency EUR
McFarlane Push To Unlock MC6160-071BB096

Image for illustration only. It may show a product series rather than the exact product offered.

McFarlane Push To Unlock MC6160-071BB096

This is a special order item. Additional fees may apply. Please contact us for details.
https://www-old.roctexo.com/web/image/product.template/46078/image_1920?unique=025b35a
Part numbers : RX1-05-04608 , MC6160-071BB096 , 05-04608
Unit of Measure: EA

179.33 EUR / EA 179.33 EUR 179.33 € excl. VAT

179.33 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The McFarlane MC6160-071BB096 is a universal push-to-unlock control from the MC6160 series. This version has a solid-wire end, a black square control knob with black push-button, and a nominal control length of approximately 2.4 m.

Designed for homebuilt and custom projects, the control uses stainless-steel construction and a high-temperature Teflon-lined wound conduit for smooth, consistent operation. The control may be trimmed to suit the installation.

  • Manufacturer part number: MC6160-071BB096
  • MC6160 push-to-unlock control series
  • Nominal length: approximately 2.4 m
  • Conduit outside diameter: approximately 6.1 mm
  • Music-wire diameter: approximately 1.8 mm
  • Maximum stroke: approximately 76 mm
  • Minimum locking force: 15 lbf

Important: This control is not EASA/FAA approved for use on certified aircraft and must not be used for flight controls or flight-control trim tabs.

Manufacturer documentation: Universal Push-to-Unlock Control Specifications.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.