Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Lycoming LIO-360-M1A Rebuilt Engine RENPL-RT10591

https://www-old.roctexo.com/web/image/product.template/105534/image_1920?unique=fc58710
Part numbers : RX1-07-23357 , RENPL-RT10591 , 07-23357
Unit of Measure: EA

80058.10 EUR / EA 80058.1 EUR 80,058.10 € excl. VAT

80058.10 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

Lycoming LIO-360-M1A rebuilt aircraft engine, manufacturer part number RENPL-RT10591.

This is a factory rebuilt Lycoming LIO-360-M1A piston engine for maintenance replacement and engine-exchange requirements. The LIO-360-M1A is a fuel-injected, direct-drive, four-cylinder, horizontally opposed, air-cooled engine with a rated maximum continuous output of 180 hp at 2,700 rpm.

The “L” model designation identifies the reverse-rotation version of the basic IO-360-M1A configuration: the LIO-360-M1A crankshaft rotates counter-clockwise.

  • Manufacturer: Lycoming Engines
  • Engine model: LIO-360-M1A
  • Manufacturer part number: RENPL-RT10591
  • Configuration: fuel injected, direct drive, four-cylinder, horizontally opposed and air cooled
  • Rated maximum continuous power: 180 hp at 2,700 rpm
  • Rotation: counter-clockwise crankshaft rotation

Please verify the engine data plate, approved technical data, required accessory configuration, propeller and airframe installation requirements, and all applicable maintenance documentation before installation.

Relevant Lycoming documentation includes the (L)IO-360-M1A Operation and Installation Manual, document 60297-36, and the (L)IO-360-M1A Illustrated Parts Catalog, document PC-(L)IO-360-M1A.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.