Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

LPS 01420 Presolve Orange Degreaser 15Oz Aerosol Case Of 12

Hazardous product
Hazardous material Special shipping rules and carrier restrictions may apply.
https://www-old.roctexo.com/web/image/product.template/120305/image_1920?unique=05494a6
Part numbers : RX1-09-00311-12 , 01420 , 09-00311-12
Unit of Measure: EA

361.24 EUR / EA 361.24 EUR 361.24 € excl. VAT

361.24 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
8 EA available on request, fees apply
Hazardous material special order from vendor stock.

LPS® PreSolve® Orange Degreaser is a high-performance, fast-acting industrial degreaser for removal of grease, tar and oil deposits. Manufacturer part number 01420 is supplied as a case of 12 aerosol cans, each containing 425 g / 523 mL.

The formula is designed to work on contact with deep penetration and controlled evaporation, leaving low residue. LPS Laboratories states that it is suitable for use on all metals and most plastics; assess material compatibility on a small, inconspicuous area before wider use.

  • Manufacturer part number: 01420
  • Product: LPS® PreSolve® Orange Degreaser
  • Pack configuration: case of 12 aerosol cans
  • Net contents per can: 425 g / 523 mL
  • For removal of grease, tars and oils
  • Flash point: 40°C
  • Manufacturer-listed NSF C1 registration for the aerosol product
  • Manufacturer lists Pratt & Whitney Canada MMC 21530 under specifications and approvals

Pressurised aerosol product. Follow the current manufacturer safety data sheet and all applicable local handling, storage and disposal requirements.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.