Skip to Content
  1. All Products
  2. All Products
  3. KP3A Bearing
Select currency EUR
KP3A Bearing

Image for illustration only. It may show a product series rather than the exact product offered.

KP3A Bearing

https://www-old.roctexo.com/web/image/product.template/62501/image_1920?unique=8ef9bbe
Part numbers : RX1-KP3A , KP3AFS464 , MS27641-3 , KP3A
Unit of Measure: EA

30.47 EUR / EA 30.47 EUR 30.47 € excl. VAT

30.47 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 51 EA ready to ship on Monday 2026-11-16
Order before 17:00 CET on Friday 2026-11-13
Up to 75 EA ready to ship on Thursday 2026-11-19
Order before 17:00 CET on Friday 2026-11-13
169 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The KP3A is a single-row, deep-groove airframe control ball bearing in the intermediate-duty KP-A series. It corresponds to standard reference MS27641-3; reference part number KP3AFS464 is included for purchasing identification.

  • Single-row, deep-groove ball bearing design
  • PTFE seals with corrosion-resistant steel seal caps
  • Cadmium-plated exposed surfaces, excluding the bore, caps and seals
  • Prelubricated for life
  • Bore diameter: 4.826 mm
  • Outside diameter: 15.875 mm
  • Inner-ring width: 7.54 mm
  • Outer-ring width: 5.94 mm

Please verify the required part number, configuration and applicable maintenance data before installation.

Technical documentation: RBC KP-A Series / MS27641 technical catalogue.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.