Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

JPI EDM 960 4C Twin Engine Monitor System 4 Tank Sys EDM-960-4CP-4

https://www-old.roctexo.com/web/image/product.template/49145/image_1920?unique=c4101d3
Part numbers : RX1-10-04733 , EDM-960-4CP-4 , 10-04733
Unit of Measure: EA

17685.49 EUR / EA 17685.49 EUR 17,685.49 € excl. VAT

17685.49 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The J.P. Instruments EDM-960-4CP-4 is an EDM-960 Twin engine data management system identified for a four-cylinder twin-engine configuration with a four-tank fuel system.

JPI describes the EDM-960 Twin as an integrated engine-monitoring instrument designed to present engine and fuel-management information in a central cockpit display. The system supports automatic scanning, LeanFind™ leaning assistance, programmable alarm functions and recorded engine data for post-flight review.

  • Manufacturer part number: EDM-960-4CP-4
  • Twin-engine, four-cylinder configuration
  • Four-tank fuel-system configuration
  • Engine temperature monitoring, including EGT and CHT functions
  • Fuel, electrical and engine-parameter monitoring functions, subject to the installed configuration
  • Data-recording and post-flight data-retrieval capability

Configuration, sensor fitment, fuel-tank calibration, aircraft-specific limitations and installation requirements must be verified by appropriately qualified personnel using the applicable JPI approved data and aircraft documentation.

Manufacturer documentation: EDM-960 Pilot’s Guide, Primary Installation Manual, and Instructions for Continued Airworthiness.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.